Continuous flow biocatalysis: synthesis of purine nucleoside esters catalyzed by lipase TL IM from Thermomyces lanuginosus.

Purine nucleoside ester is one of the derivatives of purine nucleoside, which has antiviral and anticancer activities. In this work, a continuous flow synthesis of purine nucleoside esters catalyzed by lipase TL IM from Thermomyces lanuginosus was successfully achieved. Various parameters including solvent, reaction temperature, reaction time/flow rate and substrate ratio were investigated. The best yields were obtained with a continuous flow microreactor for 35 min at 50 °C with the substrate ratio of 1 : 5 (nucleosides to vinyl esters) in the solvent of tert-amyl alcohol. 12 products were efficiently synthesized with yields of 78-93%. Here we reported for the first time the use of lipase TL IM from Thermomyces lanuginosus in the synthesis of purine nucleoside esters. The significant advantages of this methodology are a green solvent and mild conditions, a simple work-up procedure and the highly reusable biocatalyst. This research provides a new technique for rapid synthesis of anticancer and antiviral nucleoside drugs and is helpful for further screening of drug activity.

Development of a green, concise synthesis of nicotinamide derivatives catalysed by Novozym® 435 from Candida antarctica in sustainable continuous-flow microreactors.

An increasing number of studies have shown that many nicotinamide derivatives exhibited extensive biological activities, such as anti-inflammatory and antitumor activity. In this paper, a green, concise synthesis of nicotinamide derivatives in sustainable continuous-flow microreactors catalysed by Novozym® 435 from Candida antarctica has been developed. Application of an easily obtainable and reusable lipase in the synthesis of nicotinamide derivatives from methyl nicotinate and amines/benzylamines reacted for 35 min at 50 °C led to high product yields (81.6-88.5%). Environmentally friendly tert-amyl alcohol was applied as a reaction medium. Substantially shorter reaction times as well as a significant increase in the product yield were obtained as compared to the batch process. This innovative approach provides a promising green, efficient and rapid synthesis strategy for pharmaceutical synthesis and further activity research of novel nicotinamide derivatives.

Deep-Blue and Hybrid-White Organic Light Emitting Diodes Based on a Twisting Carbazole-Benzofuro[2,3-b]Pyrazine Fluorescent Emitter.

A novel deep-blue fluorescent emitter was designed and synthesized. The external quantum efficiency (ηEQE) of the blue-emitting, doped, organic light-emitting diode (OLED) was as high as 4.34%. The device also exhibited an excellent color purity with Commission Internationale de l'Eclairage (CIE) coordinates of x = 0.15 and y = 0.05. In addition, the triplet energy had a value of 2.7 eV, which is rare for an emitter with deep-blue emission, which makes it a preferred choice for high-performance white OLEDs. By optimizing the device architectures, the color of hybrid-white OLEDs could be tunable from warm white to cool white using the aforementioned material as a bifunctional material. That is, the ηEQE of the hybrid warm-white OLED is 20.1% with a CIE x and y of 0.46 and 0.48 and the ηEQE of the hybrid cool-white OLED is 9% with a CIE x and y of 0.34 and 0.33.

A novel electron-acceptor moiety as a building block for efficient donor-acceptor based fluorescent organic lighting-emitting diodes.

A new electron-withdrawing moiety (BFPz) has been used for the first time as an acceptor in OLEDs and its corresponding core unit (2-Br-BFPz) was synthesized. Combined with an electron-donating moiety triphenylamine, a novel fluorescent material with a D-A structure named TPA-BFPz was synthesized. Encouragingly, the EQE values of non-doped and doped blue OLEDs reach 3.68% and 4.42%, respectively.

De Novo Design of Boron-Based Host Materials for Highly Efficient Blue and White Phosphorescent OLEDs with Low Efficiency Roll-Off.

Borane is an excellent electron-accepting species, and its derivatives have been widely used in a variety of fields. However, the use of borane derivatives as host materials in OLEDs has rarely reported because the device performance is generally not satisfactory. In this work, two novel spiro-bipolar hosts with incorporated borane were designed and synthesized. The strategies used in preparing these materials were to increase the spatial separation of the highest occupied molecular orbitals (HOMOs) and lowest unoccupied molecular orbitals (LUMOs) in the molecules, tune the connecting positions of functional groups, and incorporate specific functional groups with desirable thermal stability. Based on these designs, phosphorescent OLEDs with borane derivatives as hosts and with outstanding device performances were obtained. In particular, devices based on SAF-3-DMB/FIrpic exhibited an external quantum efficiency (EQE) of >25%. More encouragingly, the device was found to have quite a low efficiency roll-off, giving an efficiency of >20% even at a high brightness of 10000 cd/m(2). Furthermore, the EQE of the three-color-based (R + G + B) white OLED employing SAF-3-DMB as a host was also as high as 22.9% with CIE coordinates of (x, y) = (0.40, 0.48). At a brightness of 5000 cd/m(2), there was only a 3% decrease in EQE from its maximum value, implying a very low efficiency roll-off.

The Control of Conjugation Lengths and Steric Hindrance to Modulate Aggregation-Induced Emission with High Electroluminescence Properties and Interesting Optical Properties.

A series of novel AIE-active (aggregation-induced emission) molecules, named SAF-2-TriPE, SAF-3-TriPE, and SAF-4-TriPE, were designed and synthesized through facile reaction procedures. We found that incorporation of the spiro-acridine-fluorene (SAF) group, which is famous for its excellent hole-transporting ability and rigid structure, at different substitution positions on the phenyl ring affected the conjugation lengths of these compounds. Consequently, we have obtained molecules with different emission colors and properties without sacrificing good EL (electroluminescence) characteristics. Accordingly, a device that was based on compound SAF-2-TriPE displayed superior EL characteristics: it emitted green light with ηc, max =10.5 cd A(-1) and ηext, max =4.22 %, whereas a device that was based on compound SAF-3-TriPE emitted blue-green light with ηc, max =3.9 cd A(-1) and ηext, max = 1.71 %. These compounds also displayed different AIE performances: when the fraction of water in the THF solutions of these compounds was increased, we observed a significant improvement in the ΦF of compounds SAF-2-TriPE and SAF-3-TriPE; in contrast, compound SAF-4-TriPE showed an abnormal phenomenon, in that it emitted a strong fluorescence in both pure THF solution and in the aggregated state without a significant change in ΦF . Overall, this systematic study confirmed a relationship between the regioisomerism of the luminophore structure and its AIE activity and the resulting electroluminescent performance in non-doped devices.

[Effect of bonding strength of dentin adhesive agent under 2 kinds of storage temperatures].

PURPOSE: To measure the changes of bonding strength of dentin adhesive agent at different storage temperatures. METHODS: One hundred extracted bicuspids were randomly divided into 10 sets, 10 teeth in each set. Each set was further divided randomly into Group A and Group B, each with 5 teeth. During a 10-week test period, Groups A and B were applied with adhesives labeled A and B. Group A was refrigerated under 4 degrees centigrade and B was stored at room-temperature from the second week on. The first set was stored at the same situation. The shear force of samples were tested by universal material tester at the speed of 1 mm/min. The results were evaluated using one-way ANOVA and LSD t test using SPSS 18.0 software package. RESULTS: According to one-way ANOVA, the shear bond strength of the 2 groups differed significantly (P<0.05). Comparing the sets by LSD t test, the results showed that during the first 5 weeks, there was no significant difference between Group A and B. However, there were measurable differences in performance after 6 weeks. CONCLUSIONS: With time goes on, the bonding strength of both refrigerated and room-temperature adhesives tend to diminish. After 6 weeks, the bonding performance of the 2 groups begins to differ significantly, and the refrigerated adhesives are superior to room-temperature adhesives.